接通水

Turn on the water

扣动喷枪杆上的扳机排除设备内的水或气。

Pull the trigger on the spray gun rod to remove water or air from the equipment.

将设备电源开关处于开位置，扣动枪柄扳机即可。

Turn the power switch of the equipment to the on position and pull the trigger of the gun handle.

释放喷枪扳机，并将扳机设置在安全锁定位置，关闭电源开关，按上喷嘴。

Release the trigger of the spray gun, set the trigger in the safe lock position, turn off the power switch, and press the nozzle.

扣动喷枪杆上的扳机并保持以释放在泵里生成的压力，当转换到"开"位置时，继续保持扣动扳机状态，直至喷出的水不带泡沫为止。

Pull the trigger on the spray gun lever and keep the pressure generated in the pump released. When changing to the "open" position, continue to pull the trigger until the water is out of foam.

将喷枪杆上的喷嘴卸下，这样做有助于排除泵内的空气。

Remove the nozzle from the spray gun rod to help remove the air from the pump.

将高压软管接在喷枪杆和高压超声波清洗设备之间。

Connect the high-pressure hose between the spray gun rod and the high-pressure ultrasonic cleaning equipment.

将橡胶软管接在供水系统和高压超声波清洗设备之间。

Connect rubber hose between water supply system and high pressure ultrasonic cleaning equipment.